Vanker Handheld Steam Inhaler / Steam Vaporizer / Personal Steam Inhaler - Upgraded Version

Vanker Handheld Steam Inhaler

Usage:
1. Remove the top cover, take the cup and silicon gasket out.
2. Add 30ml purified water into the Water Chamber, the water level should be 3-5mm above the external silicon ring.
3. Fill the medicine cup half-full. put the cup into the chamber.
4. Re-install the top cover securely with the silicon gasket.
(Note: the best atomisation temperature in the chamber is 30℃/8℉)
Please use saline water or WARM(NOT boiling) water to sterilize the accessories.

Note:
1. Pease add purified water instead of running water into the water chamber.
2. The machine should be cleaned promptly after use.
3. Please check whether the machine is damaged, cracks, est. before and after using the product. If yes, please contact our customer service for replacements.

Troubleshooting:
1.If the machine doesn't work or red light flashes, check whether there's enough water in the water chamber, ensure that the Atomizing Cup can touch the water surface.
2. If completely no mist or small mist, check the following:
a. If the water tempreature is below 20℃/68℉, replace it with water at 40℃/104℉.
b. If the medicine liquid has a high concentration or small quantity, it needed to be diluted with normal saline before operate.
c. If the liquid for atomization contains large particles/impurity/precipitat/flatage/colloidal particles, the machine would not work.
d. Change a NEW cup, if no mist after few uses.
3.If the top cover does not fit, please ensure the silicon gasket been placed tightly.
4.For water leakage issue, please don't make the machine tilt.

Specifications:
Ultrasonic frequency: 2.4Mhz; Operation voltage: DC12V
Size of Atomized Particle: 0.5-5 micron
Cup capacity: 10ml; Vessel Capacity: 25ml

In the box: 1* Machine ; 1* AC Adapter; 2* Face Mask(1 Large, 1 Small); 2* Mouthpiece; 5* Cup; 1* Manual

• This inhaler has been designed to offer a compact and lightweight unit for receiving inhalation treatments
• Treatment for asthma, bronchitis, emphysema and other lung illness.
• Quiet treatment & COOL MIST(NOT hot steam); Easy to use, and produce mists in seconds.
• Can use ordinary tap or distilled water with your physician-prescribed medication to create an effective high frequency mist
• Two airflow control: Produces cool mists with 2 speeds for your choice; Suitable for all ages

Vanker Handheld Steam Inhaler / Steam Vaporizer / Personal Steam Inhaler - Upgraded Version is one of alot best facial steamer troubleshooting that are being popular right now.Some of people was looking for facial steamer troubleshooting and want get it.They need facial steamer troubleshooting because need it ,when you need facial steamer troubleshooting you find right site to get review for best facial steamer troubleshooting.You can read some best review for best and cheap facial steamer troubleshooting.

And than there is some review about Vanker Handheld Steam Inhaler / Steam Vaporizer / Personal Steam Inhaler - Upgraded Version one of best product for facial steamer troubleshooting.Thank you for reading this review about Vanker Handheld Steam Inhaler / Steam Vaporizer / Personal Steam Inhaler - Upgraded Version.if you think this Vanker Handheld Steam Inhaler / Steam Vaporizer / Personal Steam Inhaler - Upgraded Version suitable for you,you can give some share to growup this site,Other wish,you can try looking for another product for facial steamer troubleshooting in this blog.I hope this review can helping you to get best product for facial steamer troubleshooting